Ghost Gunner 3

Brand :

(No reviews yet) Write a Review
Coming Soon
Maximum Purchase:
1 unit

Expected release date is 12.31.22

Ghost Gunner 3 allows you to manufacture firearms with confidence and ease, in the privacy of your own home. GG3 removes material 5 times faster than GG2 and the new unibody construction provides greater rigidity, drastically improving finished part quality. The custom spindle is powered by a specially designed closed-loop digital VFD, which sets a new standard in desktop CNC machining. GG3 ships with code to complete 80% AR-15, AR-308, M1911, and Polymer 80 frames frames. All existing jigs are compatible with GG3.

  • Ghost Gunner 3 is a complete redesign based on the successes of the GG2. It uses a milled, precision unibody frame for sharply improved squareness and rigidity. Optical limit switches and pre-loaded, self-aligning ballscrews allow it to deliver advanced positional accuracy.
  • GG3 incorporates a custom motion-control board with a closed loop, digital VFD controller. The machine accepts g-code from most CAM post-processors, and supports tool diameters up to 8 mm (~5/16”).
  • Included with the GG3: A DD USB with all our latest software. ER-11 collet nut, 5/16″ allen wrench, 3mm ball-end allen wrench, 12mm wrench, 17mm wrench, 6′ USB A-B cable, 6′ three-prong power cable. Laptop not included. Shipping is a flat rate of $100 in the United States.

    For software downloads, please visit

    Tech Specs

    System Requirements
    Windows 7+, Mac OSX 10.13+


    Parameter Value Unit Note
    Weight 19 Kg ~42 pounds
    X/Y/Z travel 89/242/79 mm Double the GG2 build volume
    X/Y/Z interior clearance 116/299/162 mm Measurements with cover on
    Peak Spindle Power 375 W Overload protection prevents exceeding
    Continuous Spindle Power 190 W Long-term average, temperature limited. Can be exceeded.
    Spindle speed 3000-9000 rpm Variable, closed loop. Can apply full power at any rpm.
    Max Linear Velocity 2600 mm/s 260% faster than GG2
    Max Linear Acceleration 250 mm/s^2 8 times more than GG2
    Spindle runout 0.0009 in Measured on tapered collet, 1mm from tip
    T-Slot Spacing 40 mm Center-to-center
    Table T-slots 2 QTY Compatible with 20 mm T-nuts
    Collet system ER11 Accepts tools up to 8 mm